1 – BEAM AND RUNGS ARE PRODUCED OF ETIAL 6063 ALUMINUM ALLOY.

2 – BEAM PROFILE HAS 50 X 50 MM SECTIONAL DIMENSIONS AND ITS THICKNESS IS 2 MM.

3 – THE HEIGHT OF THE LADDER IS 3 METERS AND HAS 3 INTERLOCKING PARTS WHICH ARE ASSEMBLED TO EACH OTHER WITH SCREW BOLTS.

4 – DISTANCE BETWEEN RUNGS ARE 50 cm VERTICALLY, 25 cm CROSSWISE.

5 – RUNGS’ WIDTH IS 15 cm.

6 – LADDER RUNGS ARE PRODUCED WITH 1.5 mm THICKNESS AS A SINGLE BOD AND MILLED TO THE BEAM USING AS A SPECIAL TECHNICAL DESIGN IN ORDER TO PREVENT GETTING LOOSEN UP OR ROTATING.

7 – IT HAS A LOAD CAPACITY OF 150 KG.

8 – LADDER WRAPPING BELTS TO COLUMNS EXISTS ONE FOR EACH AND THEY ARE MADE OF POLYESTER ROPE.

9 – LADDER HAS ONE 5 mm-THICK IRON ALLOYED HANGER.